| Place of Origin: | CHINA |
|---|---|
| Brand Name: | SINOVO |
| Certification: | CE/GOST/ISO9001 |
| Model Number: | SNR1000 |
| Minimum Order Quantity: | 1 piece |
| Price: | Negotiation |
| Packaging Details: | International standard packaging |
| Delivery Time: | 7-10 days |
| Payment Terms: | L/C, D/A, D/P, T/T |
| Supply Ability: | 30 per month |
| Name: | 1000m Crawler Or Truck Mounted Well Drilling Machine | Model: | SNR1000 |
|---|---|---|---|
| Certification: | CE/GOST/ISO9001 | Air Consumption: | 16-96 M³/min |
| Max Drilling Depth: | 1000m | Drilling Diameter: | 105-800mm |
| Drill Pipe Length: | 4.5m | Max Rotary Torque: | 20000/10000 Nm |
| Highlight: | crawler mounted well drilling machine,1000m well drilling machine,truck mounted borehole drilling machine |
||
1000m Crawler Or Truck Mounted Well Drilling Machine
1000 Series crawler or truck mounted well drilling rigs key hydraulic components of all imports of seIected brand parts, significantly reduce the failure rate and extend the working life of the rig, but also reduce the weight of the machine. And the lifting force can reach 52tons, the maximum drilling diameter can reach 800mm.
1000 Series crawler or truck mounted well drilling is the mast motions like lifting and adjusting, rods loading / unloading, rotary and forwarding, and the jacks and winches all controlled by the hydraulic system, easy to manipulate and reduced the Iabor intensity and preparing time, improved the working efficiency and quality. The chassis of the rig could be pedrailized or truck mounted.
Technical Parameters
| Max drilling depth | 1000 m |
| Drilling diameter | 105-800 mm |
| Air pressure | 1.65-8 Mpa |
| Air consumption | 16-96 m³/min |
| Drill pipe length | 4.5 m |
| Drill pipe diameter | 114 mm |
| Axial pressure | 11 T |
| Lifting force | 51 T |
| Fast lifting speed | 29 m/min |
| Fast feeding speed | 42 m/min |
| Max rotary torque | 20000/10000 Nm |
| Max rotary speed | 70/140 r/min |
| Big auxiliary winch lifting force | 4 T |
| Small auxiliary winch lifting force | 1.5 T |
| Jacks stroke | 1.7 m |
| Drilling efficiency | 10-35 m/h |
| Driving speed | 5 Km/h |
| Uphill angle | 21° |
| Weight of drilling rig | 17 T |
| Dimension | 8.8×2.25×2.65 m |
| Working condition | Loose layer and bedrock |
| Drilling methods | Top drive hydraulic rotary and propulsion, DTH hammer or mud drilling |
| Matched DTH hammer | medium and high wind pressure series |
| Optional accessories | mud pump, centrifugal pump, generator, foam pump. |
Main performance
1. Full hydraulic control system
The speed, torque, thrust axial pressure, reverse axial pressure, thrust speed and lifting speed of the 1000m crawler or truck mounted well drilling rig can be adjusted at any time to meet the requirements of different drilling conditions and different construction technologies.
2. Top drive rotary propulsion
It is convenient to take over and unload the drill pipe, shorten the auxiliary time, and is also conducive to follow-up drilling.
3. Multifunctional drilling
All kinds of drilling technology can be used in this kind of drilling machine, such as down the hole drilling, through air reverse circulation drilling, air lift reverse circulation drilling, cutting drilling, cone drilling, pipe following drilling and core drilling under development. The drilling machine can install mud pump, foam pump and generator according to the needs of users. The rig is also equipped with various hoists as standard.
4. High efficiency
Due to the full hydraulic and top drive rotary propulsion lifting, it is suitable for all kinds of drilling technology and drilling tools, with convenient and flexible control, fast drilling speed, short auxiliary time, and high operation efficiency.
5. Low cost
DTH hammer drilling technology is the main drilling technology in rock, which has high drilling efficiency and low drilling cost per meter.
6. High outrigger crawler
The high outrigger is convenient for loading and transportation, and can be loaded directly without crane. Crawler walking is more suitable for muddy field movement.
7. Positive and negative axial pressure adjustment
The best impact efficiency of all kinds of impactors has its best matching axial pressure and speed. In the process of drilling, with the increasing number of drill pipes, the axial pressure on the impactor is also increasing. Therefore, in the construction, the positive and negative axial pressure valves are adjusted to ensure that the impactor can obtain more matching axial pressure. At this time, the impact efficiency is higher.
8. oil atomizer
Efficient and durable oil mist device and oil mist pump. In the process of drilling, the high-speed running impactor is lubricated all the time to extend its service life to a greater extent.
9. Chassis
It can be crawler type self-propelled chassis or vehicle type self-propelled chassis.
FAQ
1. About Price: The price is negotiable. It can be changed according to your quantity When you are making an inquiry, please let us know the quantity you want.
2. About MOQ: If the drilling rigs, the MOQ is 1 set; If the drilling tools ( DTH hammers & bits ) , the MOQ is 10 pcs;
3. About OEM and ODM: Welcome, you can send your own design of product and LOGO to our company.
